Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

Tools/Maintenance

$29.99
The ultimate trailside companion. These high tensile steel multi-tools feature a precise fit and finish and side grips for a secure handhold even with gloves on. The m17 includes: Chain tool: 8/9/10 speed compatible Spoke wrench: #0, 1, 2, 3 Hex wrenches: #2, 2.5, 3, 4, 5, 6, 8 Open wrench: 8mm, 10mm Screwdrivers: Phillips #2, flat #2 Torx: t-25 Length: 89 mm Weight: 168g Warranty: Lifetime
$7.00
Park's Gear Clean Brush has a handle on one end with a curved, serrated edge perfect for cleaning between cassette cogs. The other end's tough nylon bristles are ideal for cleaning the derailleurs, chain and other drivetrain parts to keep them clean and prevent premature wear. It also works great on brakes and other components that collect dirt and grime. The GearClean easily fits in a toolbox or pack.
$42.95
An economical option for safely and accurately tightening fasteners to proper torque specifications. With a simple gauge readout, the TW-1.2 is intuitive and easy to use, and applies up to 14 Nm of torque to any fastener or component with left or right-handed threads. Perfect for low-torque applications such as stem bolts, levers, and carbon fiber components. 3/8" drive for compatibility with all Park Tool sockets, bits, and crow feet. - 0 to 14 Newton meter (0 to 140 inch-pound) range - 3/8" drive - Reads and registers torque values for both left hand and right hand threading - Length: 11.5" (292 mm)
$20.00
Many chains use a master link that allows the chain to be installed and removed by hand. While master links don't require traditional chain tools, over time, dirt and corrosion can make it difficult to separate them by hand. Park's Master Link Pliers make removing and installing these master links quick and easy. Simply insert the specially sized jaws into the link and squeeze the vinyl-coated handles!
$13.99
Finish Line's Super Bike Wash quickly cleans dirt, clay, road grime and chain gunk off your bike. Five different cleaning agents work together to create a high-speed cleaning system. Three different rust and oxidation inhibitors protect metal surfaces to prevent rusting. It's safe for all bike surfaces.
$9.95
Park's Valve Core Tool is great for tightening, removing and installing Schrader and Presta valve cores (the cores are inside the valve), and also Presta valve extenders that have 5mm wrench flats. It's a handy tool to save a tube when all that's wrong is a broken valve, and it also lets you remove valves to easily insert sealant.
$77.49
- Highly versatile dry weather chain lubricant - Deep penetrating, durable P.T.F.E. chain lubricant - Hold up to extreme conditions which can destroy ordinary lubes - Comfort bottle with pipette system for ease of use and application
$29.95
A great way to hold small parts, tools and components during a repair, Park Tool's Benchtop Overhaul Mat features multiple small pockets and one large work area. It's perfect for suspension work or to organize parts for installation. • Made of a rubber-like PVC • Cleans easily and looks great on any bench • Measures: 14.7” x 7” (38cm x 18cm)
$33.95
Park's I-Beam Mini Fold-Up Hex Wrench/Screwdriver/Torx Set with Chain Tool includes 1.5, 2, 2.5, 3, 4, 5, and 6mm Allen wrenches, a socket 8mm Allen, a regular screwdriver, a T25 Torx tool (for disc-rotor bolts), a tire lever, spoke wrenches and a chain tool. The I-Beam conveniently fits in pockets and packs, too.
$74.99
For use in conjunction with our reaming pedal taps, this thread insert is held in place with a strong thread locker and allows you to install any standard pedal. - Pack of 10, fits 9/16" pedals.
$255.00
"A full-featured bicycle workstand designed and built for the home mechanic. The PCS-10.3 includes Park Tool's tried and true cam-actuated micro-adjustable clamp design for quick one-handed entry and exit, as well as a quick-release height adjustment lever for easy, secure adjustment. Features 18"" (460 mm) of height adjustment and 360 degrees of clamp rotation, positioning all parts of the bike within reach for any mechanic whether seated or standing. The stand's all-steel construction with teardrop-shaped tubing ensures maximum rigidity and stability, with tubular support braces, a locking support yoke, and upgraded internals for extra dependability. The PCS-10.3 is able to hold up to 80 lbs. (36 kg), which allows for compatibility with virtually all two-wheeled pedal-driven bicycles, including fat bikes and most e-bikes. The PCS-10.3 features an integrated height-adjustable parts tray, as well as accessory ports for the Park Tool #106 Work Tray or PTH-1 Paper Towel Holder (both sold separately), so your tools and small parts are always within reach. Quickly folds down for storage and transport with a smooth-operating leg support system that pulls both legs up in one simple motion. The PCS-10.3 is the perfect way to upgrade your home shop—a stable way to hold nearly any bike off the ground for adjustments, cleaning and repair. NOTE: The maximum weight capacity of the PCS-10.3 assumes the weight is centered below the clamp and between the legs.? - Cam-actuated micro-adjustable clamp fits 7/8"" to 3"" (22 mm–76 mm) diameter tubes and seat posts of any shape and material, including aero posts and dropper posts - Narrow clamping jaws (2.7""/70 mm) fit into tight areas or on short seat posts - Rubber saddle pad allows bikes to be hung by the saddle for quick adjustment or storage - Durable, textured powder coat finish - Integrated height-adjustable parts tray - Height adjustment collar features accessory ports for compatibility with the #106 Work Tray or PTH-1 Paper Towel Holder (both sold separately) - Maximum weight capacity*: 80 lbs. (36 kg) - Height adjustable from 39"" to 57"" (990 mm–1450 mm) using convenient quick-release lever - Base when open forms a triangle of 36"" x 36"" x 48"" (920 mm x 920 mm x 1210 mm) - Folds down to 45"" x 14.5"" (1140 mm x 370 mm) - Weight: 16 lbs. (7.2 kg)"
$35.00
The Drive Thru is a dummy hub or chain keeper that replaces your wheel while cleaning the chain. It is a fast and effective way to clean your chain between races or in your garage. It allows you to fully rotate your cranks and shift through your complete range of gears while protecting the frame. It installs simply with one hand, and is quick and easy to change between bikes. The Drive Thru is also great for packing the bike for transport.  - Note: This product is thread pitch dependent. You must order the same thread pitch as the thru-axle in your bike. - Dummy axle is precision-machined from 7075 aluminum and knurled for easy grip. - Pulley is machined from durable Delrin. - Oil and solvent-resistant O-ring - Lead-in threads designed for quick insertion into the frame - No tools required, simple, one-hand installation - Weight: 62 grams
$15.00
Eyelet Bushing Tool
$13.49
- 3 replacement bleed blocks - Compatible with most 2-piston and 4-piston hydraulic disc brakes
$49.00
Oil Level Adjuster (for checking and adjusting oil level) -Reverb/Motion Control Dampers /Turnkey Dampers
$112.28
Wera torque screwdriver. Featuring unlimited torque to loosen seized screws, you can make simple adjustments of the required torque value without any special tools. Multi-component Kraftform handle with hard and soft zones for high working speeds, while being easy on the hands. Suitable for bits with 1/4" hexagon head drive. - Adjustable Kraftform torque screwdriver with Rapidaptor quick-release chuck - Suitable for bits with 1/4" hex head drive - Easy-to-read scale value - Rapidaptor quick-release technology for rapid bit change - Audible click signal when pre-set value is reached - Numerical torque value indicator
$65.00
- Made from heat-treated S2 tool steel to ensure the ultimate in strength and lasting performance. - Ergonomic, soft-plastic, TPR handle for comfort, leverage, and easy handling. - Includes: T7, T10, T15, T20, T25, T30, and T40 wrenches. The torx style fastener is quickly becoming standard fare on the modern bicycle. Having the right torx wrenches in the right sizes is essential for the modern mechanic. Pedro's Pro T/L Torx Wrench Set is up to the challenge and offers features you won't find anywhere else. We started by choosing heat-treated S2 tool steel to ensure the ultimate in strength and lasting performance. We then added extra length to each leg of the wrench offering better leverage and easy access to hard-to-reach bolts. Finally we finished off by over molding the wrenches with an ergonomic, soft plastic, TPR handle that fits in your hand like a glove providing the ultimate in grip and comfort. The set includes T7, T10, T15, T20, T25, T30, and T40 sizes all backed by Pedro's lifetime warranty.
$23.99
Converts Presta valves for use with Schrader-compatible inflation devices. - Machined aluminum is lighter than brass alternatives - Rubber O-ring provides a secure seal to prevent air leakage - Sold as a card of 12
$32.99
Elite DOT Bleed Kit replacement fittings for SRAM Bleeding Edge, Formula, Hayes, and Hope - Black seals provide easy identification for use with DOT fluid systems only - Set of 5 fittings
$53.00
- 200 hour / 1 year service kit for Super Deluxe RT3 A1 rear shocks - Includes air can seals, piston seal, glide rings, IFP seals, reservoir seals
$4.99
The Problem Solvers Suspension Pump Adapter is for use with model-year 1999 to 2000 RockShox SID suspension forks. This aluminum adapter threads into the fork to add air and fine-tune the pressure.
$4.00
Designed to fit snugly between the disc brake caliper pistons or pads, preventing inward pad movement to preserve hydraulic brake adjustment while the wheel is off the bike.. - For disc caliper repair - Fits SRAM Guide, Trail, and Avid Code Brakes
$16.13
Wera ZyklopT-handle for higher torque transfer. For 3/8" square sockets with ball lock. Adjustable drive for more flexible usage. - 3/8" Zyklop T-handle with adjustable drive - For 3/8" square sockets with ball lock - High-quality chrome vanadium steel, matte chrome-plated - For higher torque transfer
$43.00
200 hour/1 year Service Kit (includes dust seals, foam rings, o-ring seals, Charger 2 sealhead, SA sealhead) - RS-1 RLC/RL A1 (2018+)
$104.99
- Premium syringes offer enhanced clarity, improved durability, and ergonomic handles. - Innovative quarter-turn valves make it easy to quickly open and close the bleed system. - Straight and 90-degree clips keep the syringe upright to lend an extra hand to the technician. - Includes bleed blocks for most popular 2-piston and 4-piston brake calipers. - Available separately for DOT fluid and mineral oil systems, each kit contains adapters for nearly all disc brake systems on the market. - Deluxe case keeps small parts organized and protected. -01: (Black Seal) : fit most DOT fluid brakes from Avid, SRAM, Formula, Hayes, and Hope -02: (Red Seal) : fit most mineral oil brakes from Shimano, Magura, Tektro, TRP, and Hayes
$39.90
- Easy to use tool for checking chain wear
$32.99
DOT 5.1 Brake Fluid, 16 OZ Bottle. Viscosity-stable across highest range of operating temperatures.
$20.95
If you have a bike with disc brakes, you'll want Park's Rotor Truing Fork. It allows you to gently adjust bent and damaged disc-brake rotors. It's made from high-quality steel and features 2 laser-cut slots for precise adjustments and a vinyl handle for comfort and control.
$167.18
Bicycle tool set with ratchet, bit, sockets and a bit hand holder in a compact space. Perfect as a universal companion with a variety of screwdriving challenges. High-quality bit hand-holder with Kraftform Plus handle for comfortably ergonomic work, which avoids blisters and calluses. Bit ratchet for quick work when bolting by machine or when conventional hand tool is not possible due to lack of space. Fast switching from left to right and vice versa via the switching lever. Quick turning (by thumb) over the grooved ratchet head. Simple operation, even with just one hand. - Compact 39-piece screwdriving tool set for bicycle applications, also for mobile use - Hard grip zones for high working speed, soft grip zones for high torque transmission - Practical range for DIY assembly work and repairs - Tools for the most popular screw profiles on road bikes, mountain bikes and e-bikes - Robust, surface-friendly, compact low weight textile pouch - "Take-it-easy" tool finder: color coding by size