Skip to main content

Yeti Cycles SB130 C1.5 Fox Factory Suspension

Yeti Cycles SB130 C1.5 Fox Factory Suspension
This item is currently not available.

Details

The rebel yell of the middle child. Fed a steady diet of super-tech climbs. The SB130 was built to crush the biggest terrain. No trail "too" anything. Point it up or down. Enter a last-minute enduro just for the eff of it. We say no one bike can rule all. But the SB130? one bike that rules.

Features

LONG REACH
Puts riders in a balanced position perfectly centered on the bike, ready to tackle the unknown.

150MM FORK
Because our 130mm of rear suspension outperforms similarly stroked forks and pairs well with our more forward-biased position.

FRONT END DOESN'T WANDER CLIMBING
And stays composed when pointed downhill – the rider position remains neutral.

LOW SLUNG. LONG DROP.
Long-stroke dropper post capability throughout entire size range — for greater agility.

AT HOME WHEN YOU'RE NOT.
The deeper you go, the higher you climb, the later you brake, the more comfortable SB130 becomes. Bottom line, the term "trail bike" gets used pretty liberally at Yeti.

LEVERAGE RATE
A straighter, more linear progression curve means it's easier to tune shocks to pair with the suspension kinematics, and we don't have to rely on damping circuits to compensate. Being able to manipulate the leverage rate without affecting the anti-squat characteristics is unique to our patented Switch Infinity suspension. What does this mean with 6k of vert behind you on the day? You'll have more left in the tank to grab another 6k of vert, up or down. That's the SB130's best trait.

FEEL.
Big mountain feel, capable, lively, with a centered rider position.

ANTI-SQUAT
Across our line, we have chosen a relatively flat and high anti-squat curve in beginning and mid-section of travel where pedaling commonly occurs a.k.a the pedaling zone. This creates an efficient pedaling platform through your entire pedaling zone, there is an inflection point where the Switch Infinity link moves down, dropping the anti-squat drastically. Riders are typically not pedaling in this zone, so chain forces have less of an effect on the suspension performance. Decoupling of the chain forces allows the suspension to work more efficiently to absorb impacts making the feel of a Yeti distinct.

Geometry

Geometry Chart:
SMALLMEDIUMLARGEX-LARGE
A SEAT TUBE LENGTH (mm) 380 410 450 495
B TOPTUBE LENGTH (mm) 570.7 601.9 625.2 653.4
C HEADTUBE ANGLE
65.5 65.5 65.5 65.5
E CHAINSTAY LENGTH (mm) 433 433 433 433
F WHEELBASE (mm) 1173.9 1205.6 1230.2 1259.7
G ESTIMATED BB HEIGHT (mm) 337.6 337.7 337.7 337.7
H STANDOVER (mm) 723.5 725.9 728.2 730.6
I HEADTUBE LENGTH (mm) 95 99.2 110.2 121.2
J AXLE TO CROWN (mm) 557.1 557.1 557.1 557.1
K OFFSET (mm) 44 44 44 44
L STACK (mm) 611 614.8 624.8 634.8
M REACH (mm) 430.2 460.2 480.2 505.2
N FRONT CENTER (mm) 740.9 772.6 797.2 826.7
Sizes:
SMALL155 - 170 cm
MEDIUM 165 - 180 cm
LARGE 178 - 191 cm
X-LARGE 185 - 201 cm

Specs

Frame C/Series carbon fiber frame, Switch Infinity suspension technology, press-fit BB92, internally tunneled cable routing, 148mm x 12mm BOOST dropouts, sealed enduro max pivot bearings, integrated derailleur hanger, and axle.
Wheels DT SWISS M1900 30MM *Orders may ship with DT SWISS E532 30MM
Tires Front: MAXXIS MINION DHF 2.5 EXO
Rear: MAXXIS AGGRESSOR 2.3 EXO
Bottom Bracket SHIMANO XT BB92
Crankset SHIMANO XT 30T 170MM
Shifters SHIMANO XT
Rear Derailleur SHIMANO XT
Cassette/Freewheel SHIMANO XT 10-51
Chain SHIMANO XT
Brakes SHIMANO XT 4 PISTON
Rotors SHIMANO 203/SHIMANO 180
Handlebars RACE FACE AEFFECT R 35X780MM
Tape/Grips ODI ELITE PRO
Stem RACE FACE RIDE 35X50MM
Headset CANE CREEK 40 INTEGRATED
Seatpost FOX TRANSFER 31.6MM / SM: 125MM, MD: 150MM, LG/XL: 175MM
Saddle SILVERADO CUSTOM
Pedals Sold separately

* Subject to change without notice.

Reviews