Other

Zipps' Vuka Alumina Clip Risers work with the Vuka Alumina Above-Bar Clips (sold separately) and let you raise your armrest height. They're made of sturdy, lightweight aluminum and come in 10mm, 25mm, and 50mm sizes.

Adjust the width of your arm rests to ensure optimum airflow, power transmission, and comfort when doing a TT or bike leg. - Four positions reversible inwards or outwards for the ultimate in positioning - Bolt holes 25.0mm center to center - Fits Vuka Aero, Vuka Clip, Vuka Stealth

Goatlinks are designed to optimize the derailleur's position relative to your cassette. Offered in two versions - a 10-speed and 11-speed, each is intended to improve the shifting of your 1x drivetrain. - Optimized for using a Shimano XT 8000 or XTR 9000 Rear Derailleur with a 10-42, 10-44, 11-45, 11-46 rear cassette setup - Compatible with M8000 (XT) and M9000 (XTR) series eleven-speed Shimano rear derailleurs - Double chainrings are not currently supported - Triple chainrings are not supported - Direct Mount-native frames and SRAM derailleurs are not supported

The Wolf Tooth ReMote is a significant lever upgrade for cable-actuated dropper seatposts. From its hassle-free installation to smooth ball bearing action to engineered failure point, the lightweight ReMote solves many of the functional problems that come with other dropper lever designs. - Includes barrel adjuster for on-the-fly changes - Lever pivots on a 21mm ball bearing for smooth operation - Engineered break-away pivot that allows the lever to break away from the mount in the event of a crash - Cable Kind Clamp does not damage secured cables and features captive hardware - Integrates with SRAM/Avid MatchMaker X clamp-equipped brake levers for better ergonomics

Tanpan allows the usage of Shimano Road Shifters with Shimano Dynasys rear derailleurs. Built to translate the differing cable pulls between the two systems, Tanpan allows for wider gear range, more gear options and better chain security with clutch derailleurs for road or gravel drivetrains. - Not Compatible with Tiagra 4700 - Compatible with most road, CX and gravel bikes - Designed to mount directly to adjuster-free cable stops on Shimano rear derailleurs - Certain chainring and cassette configurations benefit from a Goatlink - If the rear derailleur cable is routed internally through the chainstay and exits at the end of the - chainstay above the axle or past the axle out the very end, you will need to utilize the inline ferrule

Shims for fitting 26.0mm diameter handlebars to 31.8mm clamp diameter stems. - Outside Diameter: 31.8mm - Inside Diameter: 26.0mm - Length: 44mm - Machined Aluminum - Anodized Black

BB30 service kit includes 2 Enduro 6806 ABEC-3 sealed bearings and 2 retaining clips. - Bearing Dimensions: OD: 42mm / ID: 30mm / Width: 7mm - Direct replacement bearing for OEM BB30 and BB30A systems - Enduro ABEC-3 bearings

All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - For carbon frames, use (2) M3x8 Flat head screws - For all non-carbon frames, use (2) M3x10 Flat head screws

All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (1) M6 Chainring Bolt

All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (1) M6 Chainring Bolt

All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (1) M8 Chainring Bolt (bolt only)

Get back on the trail with a quality replacement hanger. - Attachment hardware is sold separately - For use with 142x12mm, 148x12mm, 157x12mm, and 197x12mm hubs Specifications: - Size: Rear drive side, Thru Axle - Mounting location: Rear drive side - Attachment: Thru axle nut

Shimano BT-R1A External Di2 Battery - All Di2 components on the bicycle require the same firmware version. Using Di2 components with different firmware versions may cause malfunctions - Use Di2 system checker to update component firmware - Di2 External Battery, battery charger, and power cable are universal between Dura-Ace 9070, 7970, Ultegra 6870, 6770 and Alfine Di2 systems - Battery weight: 71 grams

Shimano's Di2 electric drivetrain takes shifting to the next level. Two Di2 Battery Chargers are available. Choose the model designed for your system's battery. An additional power cable is required for the external-style battery charger (sold separately). These chargers fully charge the battery in 90 minutes.

This is the correct plug-and-play wire for Shimano's E-Tube Di2 electric-shifting systems. It comes in sixteen different lengths, so choose the one(s) that's right for your Di2 E-Tube wiring configuration.

Replacement rear dropout Axle Stud Kit for Carbon V2 Beargrease, Warbird, and Warroad Frames. - Thread diameter and pitch: 12x1.5mm

SRAM PressFit 30/English Bottom Bracket Adaptor allows conventional threaded bottom brackets to be installed in a PF30 frame. - Not to be used with internal threaded bottom brackets; compatible with BBs that use two external cups

Disc brake mount adaptor. - Includes stainless steel adaptor and caliper bolts

Flat Mount Disc Caliper Bracket Bolts

GX Eagle Rear Derailleur Pulley Kit

Power Links provide tool free chain assembly. - 8-speed width: 7.1mm - 9-speed width: 6.8mm - Chain Compatibility: SRAM - Reusable: Yes

- From a long line of tough, light-weight chain engineering from SRAM - Chain connector type: PowerLock - For Use with SRAM 12-Speed Road Chains Only - No tools necessary to install - Chain connector qty/packaging: 4

These are the correct connecting links for SRAM's 12-speed Eagle chains. They are great for installing new chains and fixing chains on the road and trail, too. They come in a four pack, for use with four chains.

Hose fittings fit many of SRAM's newest hydraulic brake models. - Includes 5 Threaded Hose Barbs, 5 Compression Fittings, 1 T8 Torx Wrench - Fittings are backwards compatible with older SRAM and Avid hydraulic brakes

The Universal Derailleur Hanger consolidates thousands of hanger options across the industry. It protects your derailleur against chain jams by pivoting back and out of the way, and slips slightly when encountering impacts. It improves shifting performance, guarantees better alignment, and works with all drivetrains. Plus, if you ever need replacement, it will be available everywhere. The UDH: one hard-working hanger. - The Universal Derailleur Hanger—or UDH—consolidates thousands of mountain bike derailleur standards. - It offers unparalleled derailleur protection and perfect alignment, guaranteed. - The UDH is designed to rotate rearward in the event of impact and features the ability to "re-rail" the chain back onto the small cog. - The UDH works with all commercially available MTB and E-MTB drivetrains from Shimano to Box to Sunrace.

The Sonic/Ergo/45AR aerobar offers comprehensive yet simple adjustments, ideally suited to riders wishing to add aerobars to their road, gravel, or bikepacking bike. The Sonic/Ergo platform offers a large range of adjustments in every dimension, enabling riders to optimize the comfort of their positions. This bar can be used for draft-legal triathlon once shortened to meet the ITU Rules. - Clamp Diameter: 31.8mm (26.0 w/Shims) - Armrest: Ergo Ultra / 10mm Pads - Armrest Width: 124mm to 290mm in 18.5mm steps (with Extensions at 100mm) - Armrest Offset: -70mm to -17.5mm in 7.5mm steps - Armrest Stack: The minimum is 60mm and the bracket is compatible with our existing risers which add up to 130mm stack with (70mm of spacers added) - Extension Width: 100mm - Weight: 545g

Problem Solvers' Abnormal 46 PressFit 30 Adapter allows you to combine normally incompatible cranks and frames. The A46 modifies 46mm BB shells (the standard for PressFit 30 BB) to accept 24mm and GXP spindles. Use your old cranks with new frames! Technical Details • CR0094 accepts 24mm crank spindles (Hollowtech II, RaceFace X-Type) • CR0095 accepts GXP-type cranks from Truvativ & SRAM • Enduro cartridge bearings and seals

The Problem Solvers Steerer Tube Shims are for installing 1-1/8-inch diameter threadless stems on 1-inch diameter threadless forks. The shim is made of light, durable anodized aluminum and is chamfered on the ends for easy stem installation.

Dimension Steerer Extender adds 2 to 3-1/4" height to steerer. - Extender clamps to steerer; stem clamps to extender - Adds 2 to 3-1/4-inch height to threadless steerer - Includes top cap and long bolt - 40mm of threadless steerer is required for proper installation - Do not stack steerer extenders; no more than one steerer extender recommended per bike - WARNING: Dimension Steerer Extender is not recommended for use on forks with carbon fiber steerers

- Adapts 35mm CenterLock rotor-mount splines to accept an International Standard 6-bolt, 44mm BCD rotor - Does not fit Saint-style 47mm Oversize CenterLock, and will not work with thicker, aluminum-carrier Hope 2005+ style Mono-series rotors - Designed for up to 210mm rotors - Tabs in adapter mate to (6) M5 rotor bolt holes and is secured by CenterLock-style lockring, sandwiching 6-bolt rotor to adapter - Lockring requires a 16-notch external bearing bottom bracket wrench - CL-IS adapter is black and lockring is black with silver etching: 29g